Smart Electric Wood Ceiling Fan with LED Light and Remote Control
6 Speeds, 3 Blades, 55CM Size – Perfect for Room Decor
Please note that the 110V fan light only has three color variations and no remote control function.
New design ceiling light with fan: Compared to traditional ceiling lights, this light combines a fan and lighting. Equipped with remote control, attenuation, color temperature adjustment, 6-speed adjustable, winter reverse function, suspension mode, shutdown timer function, no noise
Fan ceiling light: The low-power fan ceiling light adopts a new LED chip, and can change three different effects (warm white 3000 K, neutral white 4000 K, and cold white 6500 K) through remote control. Cold white reading, neutral white watching TV, warm white romantic atmosphere
Fan lamp technology: The fan lamp adopts high-quality hardware lamp body, which is stable and firm after high-temperature baking and multiple processing. Good heat dissipation performance. The surface is smooth, not easy to rust, and the paint does not fall off. And durable paper. High transmittance acrylic acid contains optically dispersed particles, precise materials and uniformity, and high transmittance
Application: The fan and light are independent functions that can be used simultaneously or in sections to meet their service life. Easy to install and clean. Especially suitable for indoor lighting in living rooms, bedrooms, kitchens, kindergartens, apartments, hotels, etc.
Our service: If you have any questions or suggestions, please contact us via email. We will reply to you within 24 hours and provide you with the best service.
1. The ceiling fan does not turn
(1) Check whether there is any problem with the contact of the fan power circuit
(2) Check whether the fan power supply voltage is normal2. The fan is noisy
(1) Check whether all the fan screws are locked
(2) Check whether there is friction with others when the motor is running3. After the power is turned on, the light source cannot be turned on normally
All of our products will pass the power-on test. If there is no light, it may be that the interface of the link light source is loose due to the bumps in the express delivery, resulting in poor contact. Just check the interface and tighten the interface. Another possibility is that the zero fire wire is not firmly connected, just reconnect it. If you still can’t solve it, please contact our customer service
4. The remote control cannot be used
Please install a new battery and try again. If you still can’t solve it, please contact our customer service
5. The light source appears slightly bright after turning off the light
Please replace the neutral wire of the wall switch (the switch disconnects the neutral wire at this moment, and the normal requirement is to disconnect the live wire). If you still can’t solve it, please contact our customer service
Real customer reviews